Configure And View Administration Settings; Allow The Far-End System To Control Your Camera; Adjust For Room Lighting; Configure The Automatic Self View Control - Polycom realpresence group series User Manual

Configure and View Administration Settings

If your administrator has allowed access, you can configure some of the Administration settings, while other
settings are read only. In the local interface, use the remote go to
Once your administrator has configured a password to protect your system, the icon changes from a
icon to a icon and you must enter a User ID and password to access these settings.
For details about Administration settings, refer to the Polycom RealPresence Group Series Administrator
Guide.

Allow the Far-End System to Control Your Camera

If your system administrator has allowed access to user settings, you can allow the far-end system to control
your camera. Far-end participants can also set and use presets for your camera, if their systems support
presets.
User Tip. Setting display is immediate
Changing this setting takes effect immediately, even if a call is in progress.
To allow others in the call to control your camera:
1 From the Home screen, select
2 Select Allow Other Participants in a Call to Control Your Camera.

Adjust for Room Lighting

If your system administrator has allowed access to user settings, you can use the backlight control to adjust
the brightness of the video that the main camera sends to the RealPresence Group system. Use backlight
compensation in situations where the subject appears darker than the background. Enabling this setting
helps to darken a bright background, which can impact the tracking performance of the Polycom EagleEye
Director.
User Tip: Backlight control display
Because backlight controls adjust the main built-in camera, these controls do not make content
displayed from a computer appear brighter.
To turn backlight compensation on:
» From the Home screen, select
enable the setting.

Configure the Automatic Self View Control

If your administrator has allowed user access to the Automatic Self View Control, you can configure this
setting so that users can display or hide the Self View window.
To enable or disable the Automatic Self View Control:
1 From the Home screen, select
Polycom, Inc.
> User Settings > Camera.
> User Settings > Camera > Backlight Compensation and
> User Settings > Camera.
> or .
45