Configuring Vcr/Dvd Player Settings; Playing A Videotape Or Dvd; Recording A Call To Videotape Or Dvd - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Configuring VCR/DVD Player Settings

4 - 14
You can connect a VCR or DVD player to VSX systems. For information about
connecting a VCR or DVD player, see the section
page 2-26.

Playing a Videotape or DVD

All VSX systems can play a videotape or DVD during calls. The VCR/DVD
inputs are active when you select the camera source configured as VCR.
To configure VCR/DVD audio settings for playing a videotape or DVD:
Go to this screen:
Audio Levels
VSX 6000, VSX 7000, VSX 7000s
System > Admin Settings > Audio >
Audio Settings > Next > Next
Audio I/O
VSX 3000, VSX 5000, VSX 6000,
VSX 7000: System > Admin Settings >
Audio > Audio Settings > Next
VSX 8000:
System > Admin Settings > Audio >
Audio Settings > Next > Next > Next
VCR/DVD
VSX 7000s, VSX 7000e
System > Admin Settings > Audio >
Audio Settings > Next

Recording a Call to Videotape or DVD

With VSX 6000, VSX 7000, VSX 7000s, VSX 7000e, and VSX 8000 systems, you
can connect a VCR or DVD player to record your video conference. You can
also connect two VCRs or DVD players, to play material and record the call at
the same time.
All audio from the near-site and far-site is recorded, along with the video
source configured on the Monitors screen.
Connecting VCR/DVDs
Configure these settings:
Ensure that Midrange Speaker is On.
Set Line Input(s) to VCR.
Adjust the Level for playback volume, if
necessary.
Adjust the VCR/DVD In Level for
playback volume, if necessary.
on