Configuring Vcr/Dvd Player Settings; Playing A Videotape Or Dvd; Recording A Call To Videotape Or Dvd - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Configuring VCR/DVD Player Settings

Playing a Videotape or DVD

Recording a Call to Videotape or DVD

5 - 2
The VCR/DVD inputs are active when you select the camera source
configured as VCR. The microphone inputs remain active while the
VCR/DVD is playing. Call participants may wish to mute the microphones
while playing VCR/DVD content.
To configure VCR/DVD audio settings for playing a videotape or DVD:
1. VSX 6000, VSX 6000A, VSX 7000, VSX 7000s: Go to System >
Admin Settings > Audio > Audio Settings > Next > Next.
Ensure that Midrange Speaker is On.
2. VSX 3000, VSX 5000, VSX 6000A, VSX 6000A, VSX 7000, VSX 8000: Go to
System > Admin Settings > Audio > Audio Settings > Next.
Set Line Input(s) to VCR.
Adjust the Level for playback volume, if necessary.
3. VSX 7000s, VSX 7000e: Go to System > Admin Settings > Audio >
Audio Settings > Next.
Adjust the VCR/DVD In Level for playback volume, if necessary.
All audio from the near site and far site is recorded, along with the video
source configured on the Monitors screen.
To configure VCR/DVD video settings for recording a call:
1. Go to System > Admin Settings > Monitors > Monitors.
Choose a setting for Monitor 2.
When Monitor 2 is set to Off, you can specify which video sources to
record.
When Monitor 2 is enabled, the VCR or DVD player records what is shown
on Monitor 1.
2. Go to System > Admin Settings > Monitors > Monitors > Next.
Select one or more sources for the VCR Record Source.
If you select both near and far, the VSX system automatically switches
recording to the site that is talking. If you select content as a record source,
it is recorded (when available) regardless of who is talking.