Chronometer; Lap Time Recording - MV Agusta Rivale 800 Workshop Manual

Hide thumbs Also See for Rivale 800:

Table of Contents

Chronometer

- Turn on the chronometer ("CHRONO" mode) to

record the time taken to cover a lap.

- Press the headlight button to start recording the time.

The colon that separates the minutes from the sec-

onds and from the tenths of a second will start blink-

ing. Now, the instrument is recording the time.

NOTE: When the "CHRONO" mode is acti-

vated, the first pressing of the headlight but-

ton automatically enables the "TC" function.

From this moment on, it is possible to

immediately change the traction control

level by properly operate the "SET" and

"OK" buttons.

- Press the headlight button again to record the time

taken to cover the 1st lap. At the same time, the

instrument starts recording the time taken to cover the

The time measurement for the first lap is stored in the

memory and is visualised on the display for ten sec-

onds, after which the time measurement for the follow-

ing lap appears.