PRELIMINARY OPERATIONS
To perform the interventions on the frame, the follow-
ing must be removed previously in sequence:
- Saddle
- Saddle side panels
- Fuel tank side panels
- Side number holder
- Fuel tank
- Airbox
BATTERY CABLES
It is a good rule to disconnect the battery
cables before removing components from the
motorcycle.
Remove the saddle as described in chapter C
"Superstructures".
Remove the screw (1) indicated in the figure.
Disconnect the negative pole of the battery.
When removing the battery, it is necessary to
remove the negative pole cable first and then
the positive pole cable. When reassembling,
proceed in the reverse order.
Frame
- 3 -
G
1