Table of Contents
Advertisement
- After the vehicle is stopped, the display shows the
warning message highlighting the vehicle part or
device on which the fault has been detected.
- High coolant temperature: If a high value of the
coolant temperature is detected, the display shows the
warning alert shown in the picture. This message may
appear during every using condition of the vehicle.
WARNING
If the coolant temperature is high, stop the
motorbike and check the coolant level. If it
needs to be filled up. If the warning alert
appears even if the level is adequate, stop
driving.
Dealer Menu
The instrumentation provides the opportunity to oper-
ate on an additional set of parameters.
The auxiliary functions available are:
• "SERVICE" (Scheduled maintenance expiration)
• "UNIT CHANGE" (Changes unit of measurement)
Viewing and editing modes of operation is performed in
accordance with the procedures outlined in the para-
graphs below.
WARNING
The modification or adjustment of display
functions must be carried out with the
engine off and running on neutral, with the
motorcycle stopped with the stands on the
ground. Changing display settings while
running is prohibited.
Maintenance
- 81 -
B
Advertisement
Table of Contents
