Maintenance
The support remains connected with the three connec-
tors linked to the coils.
Remove the tappet cover acting on the 6 screws.
B
Operating as shown in the figure, slightly lift up the
cylinder head cover.
To carry out this operation, use only the work surfaces
indicated.
Take care to not ruin or deteriorate the motorcycle
parts in the proximity of the work area.
Remove the engine head cover.
Complete removal of the engine head cover by tilting it
towards the right side of the vehicle.
To adjust the play of the tappets see the procedure in
the Rivale 800 Engine Workshop Manual (Part. Code
8000B6231).
- 18 -