Table of Contents
Advertisement
INSTRUMENTS AND WARNING LIGHTS
Check ➝
At the pre-delivery, at the first 1000 kilo-
metres and then every 6000 kilometres.
B
The instrumentation check must be carried out com-
pletely on all its functions as listed in the following list.
If even one of the functions does not function correctly,
consult chapter E "Electrical system" for complete
details.
Turning the ignition key to the "ON" position activates
the instruments and the warning lights. After an initial
check-up (approximately seven seconds) the informa-
tion received correspond to the general condition of the
motorcycle at that moment.
Warning lights
1 High beam (blue)
It turns on when the high beam is on.
2 ABS warning light (orange) (only on certain models)
Lights up when the ABS system has a fault or is
deactivated, or if the speed is lower than 5 km/h.
WARNING: If the warning light comes on while
riding, stop the motorcycle immediately and
check that the ABS system is activated.
3 Low beam (green)
It turns on when the low beam is on.
4 Reserve fuel indicator (orange)
Comes on when approximately 4 litres of fuel are left.
5 Neutral warning light (green)
It turns on when the gear is in "Neutral".
6 Sidestand down warning light (red)
Lights up when the sidestand is down.
7 Engine oil pressure warning light (red)
Lights up when the oil pressure is insufficient.
WARNING: If the warning light comes on while
riding, stop the motorcycle immediately. Check
oil level and, if necessary, provide for topping up.
8 Battery charge indicator (red)
Lights up when the alternator does not supply
enough current to charge the battery.
9 RPM limiter indicators (orange/red)
They switch on before the limiter intervention, at a
number of turns dependent on the ratio of the insert-
ed gear. The limiter intervenes at 13000 rpm.
10 Turn indicator lights (green)
They light up when the turn indicators are activated.
Maintenance
Tachometer display
- 54 -
Multifunction display
2
4
8
1
3
5
7
6
Warning lights
10
9
Advertisement
Table of Contents
