Rear Brake Disc Removal - MV Agusta Rivale 800 Workshop Manual

REAR BRAKE DISC REMOVAL

Before proceeding with the removal of the rear brake
disc, it is necessary to carry out certain operations
described below:
- Remove the rear wheel.
- Remove the rear wheel pin from the motorcycle (See
chapter F).
- Remove the phonic wheel.
- Remove the four nuts fastening the disc to the
flange.
H
Check the planarity of the rear brake disc by utilising a
micrometer gauge and placing the disc on a level work
surface. Utilise the same procedure adopted for the
front wheel discs.
The planarity value must not exceed 0.3 mm.
Utilise a micrometer gauge with support to
carry out this check.
Brakes
- 30 -