Adjusting the front suspension
After having correctly mounted the entire fork unit, it is
necessary to re-establish the correct adjustments if the
front suspension in order to guarantee the best set-up
of the motorcycle.
To adjust the front suspension, refer to the values
given in the following table.
Rivale 800
Spring preload
Rebound damper
Compression damper
The adjustment of the suspensions must
NOTE
be preferably performed with the fuel tank
full.
Spring preload
The adjustment is obtained from the reference posi-
tion, which is found by fully turning the adjusting nut
counterclockwise; from this position, turn the screw
clockwise until you reach the standard position (see
table). Rotate clockwise to increase the spring preload
or counterclockwise to decrease it.
Rebound damper
The adjustment is obtained from the reference posi-
tion, which is found by fully turning the screw clockwise
and then counterclockwise until you reach the standard
position (see table). Rotate clockwise to increase the
damping action or counterclockwise to decrease it.
Suspension and wheels
Type of geometry (On road)
4,5 turns
2 turns
2 turns
Rebound damper
Spring preload
Compression damper
- 23 -
Spring preload
F