Note: Pass the cables
inside the plate/Keep the
cable out of the micro
switch
Code
Code
L=62 (contains clutch
connector)
Electrical system
Note: Avoid contact
between the clutch pipe
and dashboard – Position
the band fastener in corre-
spondence with the point
nearest to the dashboard
Code
L=25 (contains front
speed sensor cable)
- 51 -
Note: Avoid contact between
the brake pipe and dashboard
– Position the band fastener in
correspondence with the point
nearest to the dashboard
Code
Note: Activate the clutch
command to check that
the movement of the cable
does not make the dash-
board move; if this is not
the case, re-position the
clutch cable
E
Code