Table of Contents
Advertisement
Remove the union (11) indicated in the figure.
Brake fluid is extremely corrosive.
Avoid contact with the eyes, skin and nose.
Wash abundantly with water and call a doc-
tor if accidental contact occurs.
During the following operations, avoid con-
tact with painted surfaces.
To replace the front brake switch, remove the screw
shown in the figure.
After having carried out the overhaul of the
front brake pump assembly, carefully wash
and bleed the front brake system as previ-
ously described in this chapter.
H
When reassembling, pay attention to the position of the
brake hose fitting and use two newly supplied washers.
Brake hose fitting torque pressure: 16÷18 N•m
Brakes
11
- 16 -
Advertisement
Table of Contents
