Abs Unit Activation - MV Agusta Rivale 800 Workshop Manual

ABS unit activation

Once the assembling operations have been comple-
ted, it is necessary to perform the activation procedure
of the new ABS unit by using the TEXA diagnosis
software as described below.
• Start from the "Self-diagnosis" display, then press
the button shown in the picture to enter the
"Adjustments" mode.
E
• Press the "Codification" button in the upper portion
of the display; with this command, it is possible to
assign the identification number to the ABS unit.
• In the lower portion of the display, it is shown the cur-
rent configuration sent by the ECU.
• Use the button "Arrow UP/DOWN" to view the list of
the possible configurations.
Electrical system
- 44 -