Table of Contents
Advertisement
Multifunction display
11 Gear display
It displays the currently engaged gear. The "0" digit
stands for "neutral".
12 Speedometer
It displays the speed of the motorbike. It can be given
in kilometres per hour (Km/h) or in miles per hour
(Mph). The full scale measures 300 Km/h (186 Mph).
13 Control unit mapping display
Indicates the control unit mapping currently selected.
14 Clock
Indicates the current time.
15 ABS display (only on certain models)
Indicates the activation state of the ABS function.
16 Traction control level display
Indicates the traction control level currently selected.
17 Thermometer
It displays the temperature of the coolant by turning
on a variable number of segments on a graduated
scale. When the temperature falls outside the nor-
mal operating range, it may display one of the fol-
lowing information:
- the display shows just one blinking segment; it
means that the temperature is low;
- all segments are on, while the upper segment is
blinking; it means that the temperature is high.
Danger - Notice: if the temperature is high, stop
the motorbike and check the coolant level. If it
needs to be filled up. If the warning light turns on
even if the level is adequate, stop driving.
18 "TOTAL" odometer
It displays the total distance covered; from 0 to
999999 (Km or miles)
Trip counter 1, "TRIP 1"
It displays the length of a trip; from 0 to 999.9 (Km
or miles)
Trip counter 2, "TRIP 2"
It displays the length of a trip; from 0 to 999.9 (Km
or miles)
Chronometer
It displays the time measured by the chronometer
Maintenance
- 55 -
11
12
13
18
17
14
15
B
16
Advertisement
Table of Contents
