Table of Contents
Advertisement
Clock settings
- To carry out clock settings, press the "SET" button
until viewing the "CLOCK SETTING" caption.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. Do not change the display while
driving.
- Press the "OK" button for less than three seconds; the
hour digit begins to flash.
- By pressing the "OK" button again for less than three
seconds, the hour digit is increased by going to the
following numeric value.
- Press the "OK" button for over three seconds; the
selected hour digit is confirmed. If instead one press-
es the "SET" button for less than three seconds the
setting procedure is interrupted.
- After having carried out the hour digit setting, the
dashboard automatically switches to the minute digit
setting. The minute digit begins to flash.
- By pressing the "OK" button for less than three sec-
onds, the minute digit is increased by going to the fol-
lowing numeric value.
- Press the "OK" button for over three seconds; the
selected minute digit is confirmed and the dashboard
returns to "CLOCK" mode. If instead one presses the
"SET" button for less than three seconds the setting
procedure is interrupted.
Maintenance
- 71 -
B
Advertisement
Table of Contents
