Table of Contents
Advertisement
FRONT FORK
Substitute oil ➝
The front fork is vitally important for the handling and
stability of the motorcycle. It is therefore necessary to
substitute the fork oil at the prescribed intervals.
To substitute the fork oil and to do a complete overhaul
of the forks, carry out the described operations in chap-
ter F "Suspension and wheels".
SCREWS AND NUTS
Check and tighten ➝
Carry out an accurate check of the tightness of the nuts and screws on the motorcycle at the intervals prescribed.
Consult the table in chapter N "Torque pressures" for the correct values.
TUBE BAND FASTENERS
Check and tighten ➝
Carry out a general check on all tube band fasteners for their condition and tightness.
Substitute damaged band fasteners by following the relative procedure delineated in the various sections.
ELECTRICAL SYSTEM
Check the functioning ➝ At the pre-delivery, at the first 1000 kilometres and then every 6000 kilometres.
Carry out a detailed check on the various parts of the electrical system, the contacts between components and
their good functioning. Consult chapter E "Electrical system" for these checks.
BATTERY
Check and clean connections ➝
Consult chapter E "Electrical system" for the check on
the battery condition.
If it is necessary to disconnect the battery and remove
it during overhauls carried out on the motorcycle, fol-
lowing the steps below.
Insert the battery into the compartment.
The initial battery charging operation must be
performed before mounting it on the vehicle.
Maintenance
every 24000 kilometres
At the pre-delivery, at the first 1000 kilometres and then every 6000 kilometres.
At the pre-delivery, at the first 1000 kilometres and then every 6000 kilometres.
At the first 1000
kilometres
then every 6000
kilometres.
and
- 51 -
B
Advertisement
Table of Contents
