Table of Contents
Advertisement
Operating on the right side of the vehicle, remove the
CLIC R 66-100 clamp connecting the water radiator
vent hose to the expansion tank using the special pli-
ers CLIC R 205.
Special CLIC R 205 pliers tool.
When performing reassembly, check the
NOTE
conditions of the clamp and replace it if it
shows evident damage.
Disconnect the overflow pipe (2) from the expansion
tank. Check both hoses which were just removed,
making sure they have no cuts or bends which obstruct
passage; replace them if necessary.
L
Remove the expansion tank from the vehicle.
Cooling system
2
- 8 -
Advertisement
Table of Contents
