MOTORCYCLE SET-UP ADJUSTMENT
Place the motorcycle on the rear stand.
Special tool No. 8000B9312
WARNING: The following adjustments must
be made when the fuel tank is full.
Insert the setting-up arm (1) of the rear suspension
(special tool) in its appropriate seats as shown in the
figure.
Special tool No. 8000B6787
Raise the rear part of the motorcycle until the full
F
extension of the rear shock absorber is reached.
Contemporaneously measure the distance X
the upper extremity of the rear stand and the point on
the setting-up arm shown in the figure.
Two persons must carry out this opera-
NOTE
tion.
Check that dimension X
Rivale 800:
X
= 312 mm
1
Press down the saddle to compress the rear shock
absorber, then allow the vehicle to spring back to its
rest position.
Suspension and wheels
between
1
is equal to:
1
- 66 -
X
1
1