Table of Contents
Advertisement
THERMOSTAT ASSEMBLY
Insert the O-ring (1) in its appropriate seat on the cover
of the thermostat.
Check the condition of the O-ring previously utilised.
If the O-ring is not in good condition, substi-
tute it with a new one.
Apply a thin layer of silicone grease.
Recommended grease: Silicone Grease.
Apply grease on the outer flange of the thermostatic
valve on the inlet side of the engine.
L
Insert the thermostatic valve in its housing on the
engine.
During thermostatic valve assembly, ensure that the
notch (2) present on the outer flange of the valve is
positioned near the machining (3) on the engine.
Cooling system
- 24 -
3
2
1
Advertisement
Table of Contents
