MV Agusta Rivale 800 Workshop Manual page 262

Insert the pump into the stem and fasten it on with the
relative screw.
Tighten at 35 N•m.
While holding the sheath in an upright position, insert
F
the spring press spacer; pour in the following oil quan-
tities:
- Rivale 800:
(*): approximate quantity calculated in relation to the
actual maintenance level.
Repeatedly move the damping piston rod up and down
until the it slides smoothly.
Oil type used: SAE 7,5
Recommended oil: Marzocchi EBH16 SAE 7,5
Check that the oil is at level "X" with reference to the
upper sheath rim, measured when the sheath is com-
pletely compressed.
- Rivale 800:
(**): N.B.: Measurement taken with the inside rod
and the spacer in place.
Suspension and wheels
470 cc (*)
X = 100 mm(**)
- 18 -
35 N•m