Front Brake Lever Removal - MV Agusta Rivale 800 Workshop Manual

FRONT BRAKE LEVER REMOVAL

Unscrew the blocking nut.
Unscrew the pin and remove it; then remove the brake
lever.
When reassembling take care to insert the
lever into its seat.
Grease the pin:
Recommended grease: Agip Grease 30
Insert the pin into the seat and screw it in until the beat
is reached, then tighten the nut by using a screwdriver.
Front brake lever nut torque pressure: 8÷10 N•m
Brakes
- 17 -
8÷10 N•m
H