Table of Contents
Advertisement
- tighten the two screws fixing the radiator support plate
to the engine;
When you have finished tightening the unit, make sure
the hoses respect the orientation shown in the figure.
ATTENTION: The oil hoses must be the right
distance from the drain pipes to keep oil from
overheating.
WARNING: Do not turn the pipes once the
screws have been tightened.
L
The radiators that have just been assem-
NOTE
bled must include the items shown in the
diagram on page 3 of this chapter.
Carry out a final control before continuing
with the following operations. If you need
to code and define the quantity of items,
consult the parts catalogue.
Cooling system
- 34 -
Advertisement
Table of Contents
