Table of Contents
Advertisement
Wheel spindle check
Place the wheel spindle on two v-prisms on a flat sur-
face.
Utilising a dial gauge, check that the eccen-
tricity in the central part does not exceed
0.05 mm.
Wheel assembly
If the front tyre is substituted, before assem-
bling the wheel it is necessary to balance the
wheel following the indications in page 68.
After having carried out the check on the parts of the
front wheel, accurately clean the wheel spindle and
assemble it from right to left. Once the wheel has been
put back on the vehicle, re-install the nut with washer
and tighten it to the required torque.
Apply grease only to the first threads.
Torque pressure: 60 N·m
Tighten the 2 screws of the fork feet to the required
torque.
Mount the two brake calipers as described in chapter H
"Brakes".
Torque pressure: 16 ÷ 18 N·m
Suspension and wheels
- 9 -
60 N•m
F
16÷18 N•m
Advertisement
Table of Contents
