FRAME REMOVAL PRELIMINARY OPERATIONS
Place the motorcycle on the rear stand.
Special tool: code No. 800092642
Remove the components in the following sequence:
- Tank side panels;
- Radiator protective covers;
- Passenger and rider seat;
- Fuel tank;
- Air filter compartment;
- Rear side panels;
the reassembly procedures of the components indicat-
ed are described in chapter C "Bodywork".
Utilising the specific lift equipped with the related pin,
lift up the front part of the motorcycle.
Special tool:
• Front stand code No. 800095807
• Pin code No. 800095808
Frame
- 3 -
G