Motorcycle Set-Up Adjustment - MV Agusta F4 S Workshop Manual

MOTORCYCLE SET-UP ADJUSTMENT

Place the motorcycle on the rear stand.
Special tool no. 800092642
WARNING: The following adjustments must
be made when the fuel tank is full.
Insert the setting-up arm (1) of the rear suspension
(special tool) in its appropriate seats as shown in the
figure.
Special tool no. 8000B4413
Raise the rear part of the motorcycle until the full
extension of the rear shock absorber is reached.
Contemporaneously measure the distance X
the upper extremity of the rear stand and the point on
the setting-up arm shown in the figure.
Two persons must carry out this opera-
NOTE
tion.
Check that dimension x1 is equal to:
- F4 S / FT / R MY12 / F4 MY13:
- F4 RR MY12 / F4 R MY13:
- F4 RR MY13:
Should X
be different from the reference dimension,
1
loosen rear suspension half linkage fixing counternuts
(2).
Suspension and wheels
between
1
X = 218 mm
1
X = 222 mm
1
X = 225 mm
1
- 85 -
1
X
1
2
F