Power Steering Fluid - FNM HPEP 225 Installation Manual

Power Steering Fluid

IMPORTANT: Use only Quicksilver Power Trim and Steering Fluid, or Dexron
automatic transmission fluid (ATF), in power steering system.
DO NOT run power steering dry, or pump will be damaged.
1. Position drive unit so that it is straight back.
2. Remove fill cap from power steering fluid reservoir, and check fluid level. Fill to
FULL COLD mark - do not overfill.
a - Power Steering Fluid Reservoir
b - Cap / Dipstick
c - Full Hot Mark
d - Full Cold Mark
e - Minimum Mark
CAUTION
89