Power Trim Control; Power Trim Pump Location - FNM HPEP 225 Installation Manual

Power Trim Control

Any of the panel or in-handle type trim controls can be used with this Power Trim
system. Install trim control in accordance with instructions that accompany it.

Power Trim Pump Location

Select an appropriate mounting location for the trim pump that meets the following
requirements:
•
assembly).
•
•
•
•
Within limits of black and gray hydraulic hoses (coming from gimbal housing
Close to the battery so that trim pump battery leads can be connected.
Allow easy access to trim pump oil fill and vent locations.
Area where pump will not be exposed to water.
Trim pump must be mounted so that when steering wheel is turned in either direction
(right or left), the power steering booster cylinder does not come in contact with trim
pump.
26