FNM HPEP 225 Installation Manual page 48

7. Connect clevis to steering lever. Lubricate clevis pin with Special Lubricant 101. Be
NOTE: Make sure to insert clevis pin from the top to censure that cotter pin hole is as
shown in the diagram.
IMPORTANT: Steering cable has a self-locking couplet nut and does not requie an
external locking sleeve or locking plate.
Steering cable outer casing must be free to move back and forth for steering system to function
properly. Do not fasten any items to steering cable.
sure to spread both ends of the cotter pin.
a – Clevis
b – Steering
Lever
c – Clevis Pin
d – Cotter Pin
a – Self-Locking Couplet Nut
CAUTION
48
0