FNM HPEP 225 Installation Manual page 117

FNM-HPEP 225/250
23. Connector that takes the battery voltage signal from the engine starter
This eyelet connector with a hole of 8 mm is connected to the engine starter. This cable carries the 12 V
that are directed to the ECU box.
24.
Connector that takes the engine ground signal
This eyelet connector with a hole of 8 mm is to be connected to the engine ground.
25. Connector that takes the consensus signal to the engine starter
This is an eyelet connector with a hole of 6 mm that takes the signal to the engine starter.