FNM HPEP 225 Installation Manual page 67

Route hydraulic hoses exactly as shown below. This will help avoid stress on the hose
fittings and kinks in the hose.
ATTENTION:
Make hydraulic connections as quickly as possibile to prevent fluid leaks.
IMPORTANT: Be careful not to cross-thread or overtighten fittings.
6. Connect power steering hoses to control valve. Torque both fittings to 23 lb-ft (31 Nm).
a – Rear Fitting (Pressure Hose)
b – Front Fitting (Return Hose)
7. Connect flexible fuel supply line to fuel inlet fitting at fuel filter housing. Secure with hose clamp.
c
a – Fuel Supply Line
b – Fuel Filter
c – To The Fuel Pump
CAUTION
67
a
b