FNM HPEP 225 Installation Manual page 114

FNM-HPEP 225/250
17. Fuse for the glow plug modulus
This is an 80A fuse used to protect the glow plug modulus. The eyelet connector with a 6 mm hole
is to be connected to the glow plug modulus while the eyelet connector with an 8 mm hole is to be
connected to the direct 12 V of the battery, which can be drawn from the engine starter.
18.
Connector for the diagnosis
This is a 4-way connector, super-seal type, with a waterproof cap.