Predelivery Preparation; Battery Connection - FNM HPEP 225 Installation Manual

Predelivery Preparation

Battery Connection

IMPORTANT: Engine electrical system is negative (-) ground.
1. Connect engine positive (+) battery cable (usually RED) to positive (+) battery terminal.
Before starting Predelivery read "General Information" and "Installation Require-
ments" completely.
2. Connect engine negative (-) battery cable (usually BLACK) to negative (-) battery
terminal.
3. Connect power trim pump BLACK (-) battery cable to negative (-) battery terminal and
trim pump RED (+) battery cable to positive (+) battery terminal.
4. Ensure that all battery terminal connections are tight.
5. Spray terminals with a battery connection sealant to help retard corrosion.
NOTICE to INSTALLER
86