FNM HPEP 225 Installation Manual page 59

READ CAREFULLY BEFORE PROCEEDING TO POINT 4
Upper mounting – All Models
a. Determine the type of mounts of the coupling bell to the stern drive.
a – Old type - smooth surface
b. For old models with old mounts – smooth surface: use the fiber washer and the
Avoid product damage resulting from incorrect aligning of the engine. Incorrect
aligning (not centered) between the mounts of the coupling bell to the stern drive
and the mounts of the inner plate of the transom may result in a wrong aligning for
the engine. Therefore, before installing the engine make sure that the mounts of the
coupling bell to the stern drive and the the mounts of the inner plate of the transom
left and right, are correctly aligned.
double-blade safety washer.
a – Old mount – smooth surface
b – Fiber washer
c – Double-blade safety washer
b – New type – knurled surface