FNM HPEP 225 Installation Manual page 25

EXTENSION HARNESS
When routing any wiring extension harness back to the engine, make sure that the
harness does not rub or get pinched. Be sure all extension harness connector collars
are secure. Fasten harness to boat at least every 400 mm (17 inches) using
appropriate fasteners.
NOTE: It may be necessary to use an adapter harness on some models, where the
engine harness and instrumentation harness connectors are different,. Refer to
appropriate CMD for further service information.
a
Connections
a – Extension Harness From Instrument Panel
b – Engine Harness Connectors
25
b