FNM HPEP 225 Installation Manual page 62

8. Fold perforated area in bell housing dust cover.
DO NOT use an alignment tool from another manufacturer. Alignment tools from other manufacturers
may cause improper alignment and damage to gimbal bearing and/or engine coupler.
To avoid damage to gimbal bearing, engine coupler, or alignment tool:
DO NOT attempt to force alignment tool!
•
DO NOT raise or lower engine with alignment tool inserted (or partially inserted) in gimbal
•
bearing or engine coupler.
9. Attempt to insert the solid end of the alignment tool through the gimbal bearing and into
the engine couplet splines.
a - Alignment Tool
b – Insert This End Of Alignment Tool Through Gimbal Housing Assembly
a – Dust Cover
CAUTION
CAUTION