FNM HPEP 225 Installation Manual page 69

Closed Cooling Recovery Bottle
1. Connect plastic tubing (from kit) from water pump to cooling recovery bottle lower fitting .
2. Select a mounting location for coolant recovery bottle and mounting bracket that meets
3. Mount coolant recovery bottle and mounting bracket in desired location (in engine
4. Ensure the coolant recovery bottle is mounted over the water pump.
a
c
e
c
a – Cooling Recovery Bottle (wall type)
b – Cooling Recovery Bottle (on the
engine)
c - Clamp
d – Pipe
e – Return Pipe
Connect tubing that comes from the engine to the cooling recovery bottle upper fitting
(return). Secure with tubing clamp provided.
all of the following:
a. Within limits of clear plastic tubing.
b. Accessible for observing coolant level and filling.
compartment), using M8x20 long screws and flat washers.
e
d
d
b
b
69
d