FNM HPEP 225 Installation Manual page 61

4. Install both rear engine mounting bolts using hardware as shown. Torque to 51 Nm
(38 Ib-ft).
a – Rear Engine Mount
b – Inner Transom Plate Mount
c - Bolt
d – Washer
e – Spacer
f – Fiber Washer
g – Double-Wound Lockwasher
IMPORTANT: Finished boat stringer must position engine so that some mount
adjustment remains after front mount is adjusted down to stringer. This allows for
future adjustments.
5. Adjust front engine mounts until they rest on boat stringers.
6. Set engine on stringers.