•
Make sure that any test pattern (other than a full black test pattern or test pattern = none)
displays properly.
Cannot communicate with projector
•
Make sure the computer and the projector are both connected to the network.
•
Make sure that all input devices have the same subnet mask and unique IP addresses.
Inaccurate display colors
•
Adjust the color, tint, color space, and color temperature settings of the input source.
•
On the touch panel controller, tap Menu > Configuration > Color Correction and verify the
settings are correct.
Display is not rectangular
•
Verify the projector is level and the lens surface and screen are parallel to one another.
•
Adjust the vertical offset of the lens mount.
Display has suddenly frozen
•
If the source is frozen, restart the source device.
•
If the source is not frozen, restart the projector.
Display is jittery or unstable
•
Verify that the input device is connected properly. If the input device is not connected properly,
the projector repeatedly attempts to display an image.
•
The horizontal or vertical scan frequency of the input signal may be out of range for the
projector.
For more details, see
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Specification
on page 86.
Troubleshooting
82