Table of Contents
Advertisement
5. Disconnect the communications harness from the coolant reservoir.
6. Disconnect the coolant hoses from the coolant reservoir.
7. Remove the three screws securing the reservoir bracket to the projector base plate.
8. Lift and remove the reservoir from the projector.
9. Refill the reservoir as needed.
10. Replace the cap.
11. To reinstall the liquid cooling reservoir, repeat these steps in reserve order.
12. Check for leaks, especially for any hoses that were removed around the filler cap.
13. Check for proper flow from the liquid cooling module.
For more details, see
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Maintenance shutdown
on page 70.
Maintenance
73
Advertisement
Table of Contents
