7. To turn off warping, blending, or black level blending, tap Off.
Send error notifications to specified devices
If an error occurs on the projector, notifications can be sent to three different devices.
1. On the touch panel controller, tap Menu > Communications > SNMP.
2. Tap Trap IP Address 1.
3. For the device you want to send error notifications to, enter the IP address.
4. Tap OK.
5. To add a second or third device, repeat steps 2 to 4.
6. Select the options you want to monitor.
Options include lamp fault, lamp life, power, fan stall, and thermal sensors.
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Operation
61