Tools required for installation
•
12" screwdrivers: Phillips #2 (magnetic) and flat
•
19 mm and 7/8" wrenches
•
Assorted Allen keys (metric)
•
Christie approved protective safety clothing if working with the lamp
•
Lens cleaning tissue and solution
Projector components
A
ID
Item
A
Touch panel controller (TPC)
B
LED status indicators
C
Manual douser override
D
Lamp door and lamps
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
D
B
C
B
J
LENS SIDE
Description
A touch-sensitive screen used to control and monitor operation. For
information about TPC controls and settings, see
LED color and blinking rates (located in both back corners of the projector)
provide information about the status of the projector. For information about
projector states and status, see
page
57.
Closing the douser rotates a shutter blade in front of the lamp and reduces
the lamp power to 2.0 kW to conserve lamp life. The override is for
emergency use only.
The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp
types, see
LAMP SIDE
E
I
LED expected behavior on power up on
Accessories
on page 99.
Installation and Setup
F
G
H
Menus on page
62.
22