Table of Contents
Advertisement
Menu tab details
Menu
Description
Image Settings
Adjust image settings such as color space, sharpness, gamma function, ambient light, and
frame delay.
Lamp
Adjust the lamp power, calibrate the lamp, view lamp history and to input new lamp
information when performing a lamp change. Available options:
• Lamp Mode—See
• Lamp Power—See
• Lamp life warning at (hours)—See
• LampLOC—See
• Lamp History—Display the history of all previously installed lamps. (Read-only)
• Change Lamp—See
Configuration
Adjust the projected image orientation and the projector Ethernet settings. Available options:
• Color Correction—See
• Screen Image Orientation—See
• EDID Window Mode—Inform the source device to split the 4K video raster into two or
four columns instead of four quadrants.
• EDID Timing—See
• Diagnostics—Configure diagnostics such as freezing an image and selecting test patterns.
Communications
Adjust projector Ethernet settings and set notifications for projector errors. Available options:
• Device name—Set the name of the projector.
• Group name—Set the name of the group the projector belongs to.
• Ethernet Settings—See
• SNMP—See
General
Adjust settings such as standby mode, auto power up, and video loop out. Provides current
date and time information.
Status tab details
Window
Description
Alarms
Display the location and the fault condition for any active alarms.
Configuration
Display the projector model, serial number, output resolution and date of manufacture.
Cooling
Display the status of the liquid cooling module and the cooling fans.
Lamp Info
Display the current lamp and lamp power supply information, such as: lamp state, hours,
type, serial number, power usage, internal operating temperature and fan status.
Serials
Display the serial numbers for all electrical components, such as: main control board,
backplane, image processor, formatter boards and option cards.
Signal
Display the status of the four available option card slots.
System
Display system hardware control settings, such as: projector hours, pitch/roll, lamp motor
status, lens motor status, and built-in self test.
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
Track lamp intensity with LiteLoc
Adjust lamp power
Add lamp end-of-life indicator
Adjust the lamp position with LampLOC
Inspect and clean optics
Color correction
Select screen image orientation
Configure the projector for the 3D source
Set up Ethernet
Send error notifications to specified devices
on page 59.
on page 57.
on page 58.
on page 77.
on page 53.
on page 39.
on page 47.
on page 61.
Menus
on page 60.
on page 48.
65
Advertisement
Table of Contents
