Table of Contents
Advertisement
Operation
This section provides information and procedures for operating the projector.
Projector LED status indicators
The table identifies the LED state colors and meaning.
LED
Solid Green
Solid Yellow
Solid Green, Yellow and Red
Flashing Green
Flashing Yellow
Flashing Red
Flashing Green and Yellow
Turn the projector on
Warning! Failure to comply with the following could result in death or serious injury.
• Do not attempt to turn the projector on if the AC supply is not within the specified voltage range.
1. Set the all the breaker switches on the lamp power supply to their on positions.
2. Set the breaker switch on the projector baseplate to the on position.
3. When the projector reaches standby, on the touch panel controller, tap Home > Power.
For more details on the specified voltage range, see
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
State
On
Standby mode
AC is on
Warm up
Cool down
Alarm or warning preset
AC on to standby
Description
Video electronics are on, the lamp is on.
Video electronics are off, lamp is off.
MCPU board software has not started initialization.
Video electronics are initializing, lamp is striking and
warming up.
Lamp is off, video electronics and lamp are cooling
down.
Problem with the projector must be addressed.
MCPU board software has started initialization.
Power requirements
on page 94.
56
Advertisement
Table of Contents
