Power Indicator; Lamp Indicator - Christie L2K1500 Setup Manual

Indicators
q
w
e
r
t
y
LAMP 1/2/3/4 REPLACE indicators
q POWER indicator
This indicator lights green when the projector is
ready to be turned on in standby mode. And it
flashes green in Power Management mode.
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode.
e WARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high.
r WARNING FILTER indicator
– Lights orange when the clogging of the filter
is detected or the filter counter reaches a time
set in the timer setting, urging immediate filter
replacement.
– Blinks orange during a filter cleaning process.
t SHUTTER indicator
Lights blue when the shutter is closed.
y LAMP REPLACE indicator
Lights orange when any of the projection lamps
reaches its end of life.
- When any of the LAMP 1/2/3/4 REPLACE indicators lights:
The corresponding lamp is approaching its end.
- When any of the LAMP 1/2/3/4 REPLACE indicators flashes:
The corresponding lamp needs to be replaced.
- 10 -
020-000410-01 Rev.1 (05-2011)