Table of Contents
Advertisement
input
Two-Port
configuration—Two cards (2)
Slot 3
Slot 4
Connect a video source using DisplayPort
The Twin DisplayPort input card (TDPIC) accepts digital video data from the DisplayPort sources.
The input configurations listed below are supported.
Input
Description
configuration
Four-Port
Enables connection of four DisplayPort cables to two or four TDPIC
cards. Each DisplayPort input supplies one quadrant or column of a 4K
input image. This configuration supports high resolution and high
frame rate input video streams.
Four-Port, Dual-
May be used for Dual-Input 3D configurations.
Input 3D
Two Port
Enables connection of two DisplayPort cables to two TDPIC cards. Each
DisplayPort input supplies one of two columns of a 4K input image.
Two-Port Dual
May be used for Dual-Input 3D configurations.
Input 3D
One-Port
Enables connection of one DisplayPort cable to the 1-IN input of a
TDPIC card (any slot). In this configuration the DisplayPort input
supplies the entire video raster.
One-Port, Dual-
May be used for Dual-Input 3D configurations.
Input 3D
For information on the video quadrant mapping for Four-Port and Two-Port configurations, see
Port: TDPIC card
on page 42 and for limitations of one card use for One-Port Dual-Input 3D, see
Mirage signal connectivity
Connect a video source using 3G input card
The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)
sources. The input configurations listed below are supported.
Mirage 4K35 User Manual
020-101377-03 Rev. 1 (07-2015)
1-Dual Link DVI-I
1-Dual Link DVI-I
on page 88.
Columns
1 (left most)
2
Connect Devices
Requirements
Two or four TDPIC
cards
Four TDPIC cards
Two TDPIC cards
Four TDPIC cards
One TDPIC card
One TDPIC card
Two-
43
Advertisement
Table of Contents
