The Add/Edit Auto-Attendant Screen - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

Chapter 19 Auto-Attendant

Each field is described in the following table.

Table 101 Outbound Line Management > Auto-Attendant

Add, Advanced,

Edit, Delete

19.3.1 The Add/Edit Auto-Attendant Screen

Use this screen to add or edit an auto-attendant. To access this screen, click the

Add or Edit icon in the Configuration > PBX > Outbound Line Management

> Auto-Attendant > Customized screen to view the screen as shown.

Figure 167 Auto-Attendant > Add/Edit

Each field is described in the following table.

Table 102 Auto-Attendant > Add/Edit

This field displays the ID assigned to an auto-attendant.

This field displays the name assigned to an auto-attendant.

This field displays the description for an auto-attendant.

Add - to create a new auto-attendant.

Advanced - to configure an auto-attendant.

Edit - to change the description of an auto-attendant.

Delete - remove an existing auto-attendant.

Type a name for this auto-attendant. This field can be 1-20

alphanumeric characters (A-Z, a-z, 0-9) and underscores (_).

Type a description for this auto-attendant. This field can be 0-63

alphanumeric charactes (A-Z, a-z, 0-9), underscores (_), hyphens (-)

and spaces. 0 means this field can be left blank.

Click Add to save your changes.

Click Cancel to go back to the previous screen without saving your

X6004 User's Guide