Batch File Format - ZyXEL Communications X6004 User Manual

Chapter 7 Auto Provision
Table 33 Server Configuration > Auto Provision (continued)
LABEL
Auto Provision
Batch
Configuration
Batch File
Upload
Current SIP
Peer List
Phone Numbers
MAC Address
Serial No.
SPTGEN File
Exist
Phone Type
Edit
View SPTGEN

7.2.1 Batch File Format

Each entry in the batch file consists of the extension number followed by a comma
"," and either a SIP device's MAC address or a serial number.
The extension number must be 3~10 numbers (0~9).
A MAC address must be 12 hexadecimal digits.
A serial number can be up to 10 numbers (0~9) and letters (A~Z).
For example, if extension 2222 goes to a SIP device with MAC address
12:34:56:78:90:AB, specify "2222,1234567890AB" as the entry. If an extension
goes to a softphone, specify a serial number, such as "123456ABCD" for example,
instead of a MAC address. So if extension 3333 goes to a softphone, specify an
entry like "3333, 123456ABCD".
156
DESCRIPTION
Select Enable to turn on auto provisioning for this device, or Disable
to turn it off.
Click Browse to locate a csv format file for batch configuring ZyXEL's IP
phones, and Upload to copy it to the X6004. Each entry in the batch
file consists of the extension number followed by a comma "," and a
SIP device's MAC address or serial number.
This field displays the extension number configured on the X6004.
This field displays the MAC address of the ZyXEL device specified to
receive configuration settings from the X6004.
This field is blank for extensions assigned to software based IP phones.
This field displays the serial number of the software based IP phone
specified to receive configuration settings from the X6004.
This field is blank for extensions assigned to hardware based IP phones.
This field displays Yes, if a configuration file (SPTGEN file) has been
created. It displays No, if an SPTGEN file has not been created.
This field displays the type of phone connected to the X6004 using SIP.
Click the Edit icon to create a configuration file and associate it with a
ZyXEL device on your network. The Auto Provision Settings screen
opens.
Click the Advanced icon to view the settings in the configuration file.
X6004 User's Guide