ZyXEL Communications X6004 User Manual page 143

Table 28 Server > Feature Code (continued)
LABEL
Second Dial
Mobile
Extension On
Mobile
Extension Off
Mobile
Extension
Auto On/Off
Internal
Operator (0 or
9)
Apply
Reset
X6004 User's Guide
DESCRIPTION
This code is used to get a second dialtone. When you enter the Second
Dial code from your phone, the X6004 opens a connection to the outside
telephone network.
For example, in many office environments you cannot access an outside
dialtone unless you press "9" or "0" first. A number dialed without such a
prefix is considered internal and thus routed to the appropriate
extension. If that extension does not exist, an error is returned.
Leave this field blank if you do not require people using your telephone
network to dial a specific number to access an outside line.
Note: You only need to enable this function if your phone network is
analog-based (such as one that uses FXS). Digital phone
systems such as SIP and BRI do not require it.
Note: If you enable this function on a digital network, a person does
not need to use the Second Dial number in conjunction with
any phone numbers dialed.
This code is used to activate a mobile extension.
For example, if your IP PBX extension has been configured to use your
cell phone as a mobile extension, you can dial into the X6004 with your
cell phone and then enter this code. That tells the X6004 to send all calls
to your extension to your cell phone.
This code is used to turn off the mobile extension feature.
For example, if all calls currently incoming to your extension are sent to
your cell phone, you can dial into the X6004 and then enter this code.
That tells the X6004 to stop sending calls intended for your extension to
your cell phone.
This code is used to activate the mobile extension feature from your
regular telephone extension.
Once activated, calls are sent both to your extension and to the phone
designated as the mobile extension.
When you turn off this feature from your regular telephone extension,
then calls are no longer sent simultaneously to both your extension and
the mobile extension; they are sent strictly to your regular extension.
Use the first field of this code to set which number (0 or 9) internal users
dial to reach the internal operator. Use the second field to specify the
operator's extension number. The extension must already exist in the
X6004.
Click this to save your changes.
Click this to set every field in this screen to its last-saved value.
Chapter 6 Server
143