The E-Mail Screen - ZyXEL Communications X6004 User Manual

Chapter 6 Server

6.9 The E-Mail Screen

Use this screen to configure the mail server information through which the X6004
sends voice mails and CDR (Call Detail Record) files to the email addresses which
you configured in extension voice mail (see
(see Section 28.2 on page
Configuration > Server > E-Mail to view the screen as shown next.
Figure 63 Server > E-Mail
Each field is described in the following table.
Table 29 Server > E-Mail
LABEL
E-Mail Server
Sender
SMTP
Authentication
Apply
Reset
144
414) screens. Click Configuration > PBX > Server
DESCRIPTION
Specify a mail server's IP address.
Specify the sender's email address.
Select this and enter your username and password if user
authentication is required in the mail server.
Click this to save your changes.
Click this to set every field in this screen to its last-saved value.
Section 13.3.8 on page
X6004 User's Guide
216) and CDR