ZyXEL Communications X6004 User Manual page 409

Each field is described in the following table.
Table 163 Log Setting > Internal Log
LABEL
Active Log and
Alert Setting
Log Category
System Log
E-mail Server
E-mail Server
Active
Mail Server
Mail Subject
Send From
Send Log To
Send Alerts To
X6004 User's Guide
DESCRIPTION
This column displays the source of log events that you can record on
the X6004. The categories are:
• All Logs - all logs generated on the X6004.
• IPPBX - all activities related to the PBX functions of the X6004. For
example, a an FXS card failure.
• User - administrator activity, such as a successful login.
• myZyXEL.com - service registration with the myZyXEL.com website
• Default - All other logs generated by the X6004. For example,
failure to reach a DHCP server.
Select whether you want to enable logging and the types of logs to
record for each source of logs as described in the Log Category field.
The choices are:
• Disable All Logs - Select this if you do not log any events.
• Enable Error Logs - Select this if you want to enable error logs.
• Enable Warning Logs - Select this if you want to enable warning
and error logs.
• Enable Notice Logs - Select this if you want to enable warning,
error and notice logs.
• Enable Info Logs - Select this if you want to enable warning, error,
notice and info logs.
• Enable All Logs - Select this to log all events.
Select whether you want to send logs to the e-mail address of an
administrator you specify in the Log Setting screen.
• Enable Logs - Select this to send logs to an administrator at the
time interval you specify in the Log Setting screen.
• Enable Alert Log - Select this to send e-mail alerts to an
administrator when emergency, alert or critical level logs are created
on the X6004.
Select this to activate sending logs to this E-Mail server.
Enter the server name or the IP address of the mail server for the e-
mail addresses specified below. If this field is left blank, logs and alert
messages will not be sent via e-mail.
Type a title that you want to be in the subject line of the log e-mail
message that the X6004 sends.
Enter the e-mail address that you want to be in the from/sender line of
the log e-mail message that the X6004 sends. If you activate SMTP
authentication, the e-mail address must be able to be authenticated by
the mail server as well.
Logs are sent to the e-mail address specified in this field. If this field is
left blank, logs will not be sent via e-mail.
Alerts are sent to the e-mail address specified in this field. If this field is
left blank, alerts will not be sent via e-mail.
Chapter 27 System Log
409